Filling the Bottle: Unscrew the pump top and fill the bottle with your choice of foaming liquid soap or face wash. Do not overfill; leave some space at the top to ensure the pump mechanism works effectively.
Securing the Pump: After filling, carefully screw the pump top back on. Ensure it’s tight to prevent any leakage.
Priming the Pump: For the first use, pump the dispenser a few times to prime it, allowing the soap or face wash to flow through the pump.
Dispensing Soap/Wash: Press down on the pump to dispense the soap or wash. Adjust the amount as needed.
Refilling: When the contents are low, simply refill the bottle following the same steps. There’s no need to fully empty it before refilling, but make sure the new product is compatible with any remaining content.
Cleaning: Regularly clean the bottle to maintain hygiene. Rinse it out with warm water, and if needed, use a mild detergent. Ensure the bottle is thoroughly dry before refilling.
Storage: Store the bottle in a cool, dry place away from direct sunlight to preserve the quality of the product inside.
Maintenance Tips:
Regularly check the pump mechanism to ensure it's working smoothly.
If the pump gets clogged, remove it and soak in warm, soapy water, then rinse and dry before reattaching.
Avoid using abrasive cleaners on the bottle to prevent scratching the surface.